Safety Equipment for Forklift

Safety Equipment for Forklift - There are various industries and operations, for example warehousing, agricultural and manufacturing that make use of powered industrial trucks including lift trucks or forklift trucks on a regular basis inside the workplace. Lift trucks are used so as to lower or raise things or transport items that are stored in containers or on pallets to other areas in the place of work. These industrial machinery help to improve productivity at the jobsite by reducing the need for excessive manual handling of items by employees. According to the National Institute for Occupational Safety and Health, there are more or less 20,000 serious injuries each and every year in America and around 100 fatalities due to the result of lift truck incidents.

There are several types of lift trucks that have different load capacities. These models differ for specific maximum weight and forward center of gravity where a load is concerned. Employee injuries typically occur as a result from crushing incidents, collision with pedestrians, fall from the forklift or forklift overturn. Operator falls could happen as the worker descends or ascends into the driver cab or becomes ejected from the machine in the event of a collision or an accident. Forklifts could overturn due to being overloaded, or having an unequal center or gravity of the cargo or traveling over an uneven surface that can cause the vehicle to topple over. It is important for other co-workers to observe strict preventive policies whenever working near the forklift. Without sufficient safety measures, pedestrian co-workers are at risk from accidents or collisions connected with an unsafe load.

There are strict training and standards to be following with regards to forklift training, maintenance and operation. One example, those in non-agricultural businesses below the age of eighteen years are not permitted to work a lift truck. It is necessary that all lift truck operators should have undergone both theoretical and practical training before commencing lift truck operation and they are also required to take refresher courses.

The standards which are defined in the "American National Standard for Powered Industrial Trucks, ANSI B56.1-1969 are what powered industrial trucks must follow. The particular OSHA standards that employees as well as employers need to follow as stated in the General Industry Standards include 1910.178 "Powered industrial trucks", and standards for Marine Terminals 29 CFR 1917 Subpart C, "Cargo handling gear and equipment" and Long shoring 29 CFR 1918 Subpart G, "Cargo handling gear and equipment other than ship's gear.

It is even vital for employers to aware of the various other directives and regulations. The NIOSH and OSHA regulations both outline for the employers and employees to all the regulations which apply.


Click to Download the pdf

Forklift Parts

Fork Slot Truss Jibs

Fork Slot Truss Jibs - Attachments jibs can be used on industrial lift trucks, extendable-reach lift trucks, or on rough terrain straight-mast lift trucks. The forklift jib cranes could be installed onto the forklift by inserting both of the forks into the fork pockets. The rear of the jib crane then seats against the back of the fork and a...

More

---

Parts for Heavy Duty Scissor Lift

Heavy Duty Scissor Lift Parts - Scissor lifts can help transport different items, normally used to lift truck workers to heights for certain tasks. This is done by raising and lowering the platform. The scissor lift truck is made up of a work platform, the lower frame assembly and the scissor legs. These pieces of machine are valuable if you...

More

---

Gas Forklift Attachments

Gas Forklift Attachment - Liquid petroleum fuel, used in heating vehicles and appliances, is a really combustible mixture of hydrocarbon gases. LPG has likewise been increasingly used as an aerosol propellant and refrigerant. Liquefied petroleum gas or also referred to as LPG, is replacing chlorofluorocarbons in an effort to be able to decrease ozone layer damage. LPG is often referred...

More

---

Part for Aerial Work Platform

Aerial Work Platform Part - Aerial lifts can be utilized to accomplish a lot of unique tasks done in hard to reach aerial places. Many of the duties associated with this style of lift include performing daily repair on structures with elevated ceilings, repairing telephone and power lines, lifting burdensome shelving units, and pruning tree branches. A ladder could also...

More

---

Attachment for TCM Forklifts

Attachments for TCM Forklifts - In the global industry of material handling, lift trucks play a major role for transporting industrial goods. First innovated as industrial vehicles in the 1930s in America, forklifts gained popularity after WWII during the 1940s. Becoming an efficient and reliable means to material handling solutions, the need and practicality of these machinery spread worldwide. In...

More

---

Attachments for Narrow Aisle Forklifts

Narrow Aisle Forklift Attachments - This electric Narrow Aisle Order picker comes together with many design benefits like the battery discharge indicator together with lift interrupt technology that extends battery life which notifies the operator when the batter is in need of a charge. The hour meter provides information useful to carry out planned maintenance based on how much the...

More

---

Clamp Forklift Part

Clamp Forklift Part - Drum Clamps are additional parts that are usually used in the chemical and petroleum businesses. They were particularly designed for the secure handling of standard 55-gallon drums. These attachments significantly enhance production since they can handle up to 4 drums per load. Drum Clamps are even used in the food processing business and wherever product is...

More

---

Advance-Nilfisk Parts

Advance-Nilfisk Parts - Imagine how long and tiresome it will really be to tidy up after a party, with no help from machines. Not too long ago, the dirt from carpets and upholstery had to be beat out of them manually; cleaning cloths, brooms, and brushes were the best cleaning products back then. P.A. Fisker, the man who founded Nilfisk-Advance,...

More

---